Overview
Our angle steel fence posts (L-section) provide high rigidity and clean alignment for chain-link and agricultural fencing. The open L profile resists bending and is perfect for end and corner assemblies.

Specs & Options

• Profiles: 40×40, 50×50, 60×60 mm

• Thickness: 3–6 mm (project-dependent)

• Heights: 150–300 cm (line, end, corner, gate)

• Finish: hot-dip galvanized or industrial paint (optional PVC color)

• Fittings: hole pattern or clamp-ready; post caps optional

Compatibility
Works with galvanized/PVC chain-link mesh, tension & binding wires (2.0–3.0 mm), barbed/razor wire (with V-brackets), and single/double gates.

Installation Tips
Set posts in concrete footings; orient the L to support mesh load; brace end/corner posts with struts; tension top/bottom wires before fixing the mesh. For slabs, use base plates with mechanical anchors.

Tools & Calculators
Plan counts and heights using our Chain-Link Calculator and Panel Fence Calculator.

FAQ (short)

Which profile should I choose? For windy sites or higher fences, use 50×50×5 mm or 60×60×5–6 mm.
Galvanized or painted? Galvanized gives maximum corrosion resistance; paint adds color.
Are clamps/caps included? Sold separately—see accessories.